|
Save up to 35% on your electric lighting expense with the
Power Save HID Light Manager & the
Power Save FLUORESCENT Light Manager
The Power Save HID
Light Manager controls any ballast-based, gaseous
discharge lighting system. This includes Mercury Vapor,
Metal Halide, High and Low Pressure Sodium. Its flexible
design allows The Power Save HID Light Manager
to interface with any dedicated lighting circuit of 480
volts in capacities of 10 to 100 amperes three phase.
One unit can reduce the energy consumption of one,
ten, 100 or even 400 lighting fixtures and the savings can
be measured within 20 minutes after the lights turn on! |
 |
HID System/Specs
 HID Light Manager
Install Instructions
Reseller Opportunities
Testimonials
|
The
Power Save HID Light Manager works in conjunction with other
energy savings devices such as high efficiency lamps,
photoelectric switches, and other energy management systems.
Down-line switching capability is also an available option.
Additionally, running the lamps at a lower wattage
will reduce the operating temperature, this prolonging the
life of the lamps and the ballasts by up to 40%. The
Power Save HID Light Manager controls
spikes, controls and regulates line voltage to induce savings
and also prevents over-voltage situations, which are
a major cause of premature lighting system failure.
We offer 4 sizes and custom sizes as
well:
10kva or 12amps 3-phase 480 volt
15kva or 18amps 3-phase 480 volt
25kva or 30amps 3-phase 480 volt
50kva or 60amps 3-phase 480 volt
|
|
Power Save HID Light Manager
(plus S&H)
|
Benefits:
-
Most Importantly, immediate reduction
of electricity costs
-
Automatic By-pass built in
-
Existing ballast, fixtures or lamps
do not require replacement
-
Power Save HID Light Manager is
compact requiring limited space
-
Installation is quick, easy and
requires minimal adoption to existing equipment
-
Environmentally friendly, reduced
consumption of electricity equals reduced greenhouse gases
generated
-
Cost effective solution
-
Investment return in approximately 12
to 30 months
-
Reduce real demand and penalty
charges
-
Peak load incentives (contact your
local utility for details and availability)
-
Power Save HID Light Manager
unit has a display inside the controller casing
-
LED display for time (am/pm), date
month, hour, energy saving levels and up to 16 stage display
for logic controller
Power Save HID Light Manager can be used in the following
applications:
Street lighting, highways, bridges, tunnels, parking areas,
indoor and outdoor garages,
industrial buildings, plants, warehouses, factories, large
showrooms, hospitals, care facilities, correctional
facilities, museums, shopping malls, large retail stores,
casinos, gas stations, schools, university, colleges,
educational facilities, government buildings, condominiums,
rental properties, high-rise buildings, sport facilities, ice
rinks, soccer fields, baseball diamonds and all indoor
sporting facilities (pools, tennis, fitness club etc.).
|
The Power
Save Fluorescent Light Manager
The Power Save Fluorescent
Light Manager is ideal for those seeking easy
installation, comfort from harsh lighting environments,
the ability to control various light sources, and energy
savings. The Power Save Fluorescent Light Manager does it
all, it can control Compact Fluorescent lights
(non-dimmable and dimmable), Linear Fluorescent tubes
(T12, T8, T5, circular) with standard electronic and
magnetic ballasts, Cold Cathode lamps, Halogen, and
Incandescent. Step down dimming allows you to set your
personal preferences. Memory is protected during temporary
power failures.
Easy
to install:
AC power failure correction mode.
Micro-Processor controls various light sources.
Memory of last setting level - when turned off and on again, automatically
sets to last level.
Installation is made simple since it is a direct
replacement of the existing wall switch. Also
initial adjustment for size of the light load and dimming
can be preset to the customer’s preference. |
|
Fluorescent Light Manager Reference Guide
Flourescent Light
Manager Install Instructions
Flourescent
Light Specs
Reseller Opportunities
|
| Because of it
unique ability to control such various sources, it is also
currently under test for other control functions such as
improved fan speed control. This
Universal Control Device (UCD) represents a true
breakthrough in technology.
|
|
Power Save
Fluorescent Light Manager
300watt 120v 1-phase unit
$99.00 (plus S&H)
|
The first model has been designed UCD-01
for a single phase 120V / 60Hz, 300W load. The unit meets
safety standards for Solid-State Dimming Controls, ANSI/UL
1472 First Edition, and CSA-C22.2 No. 184-96.Additional features of future models will
be improved controls including light harvesting remote
control, motion and/or infrared sensors, and touch screen
displays.
Product Description: 300W-120VAC Universal Control Device
dimmer for single pole applications with all Compact
Fluorescent Lights (non-dimmable and dimmable), Fluorescent
Linear Tubes with standard electric and magnetic ballasts,
Cold Cathode Lamps, Halogen, and Incandescent lights.
Product Features:
Model Name: UCD -01
Switch Type: Single Pole
Type: Digital
Load Type: Resistive, Inductive, Capacitive
Load Rating: 300W / 150W CFL *not to exceed 200W CFL
Voltage: 120V AC 60 Hz
Warranty: 1 year limited
Standards and Certifications: ETL/CSA
GFI Compatible
Color: White
United States Patent 7164238
Back to Top
Become A Reseller!
Click here if you are interested
in adding a significant revenue stream to your business as a
Greenwise Power Solutions reseller!
|
|
Wireless
Internet Solutions
through
:
